Pioneer Djm-300 S(silver) Dj Mixer

• £60
• Location: 

  Leeds

• Posted: 08/11/2009 16:04

As with all pioneer DJ equipment, this is a very good quality mixer. Made using the same parts as pioneer's industry standards these mixers are built to last.

I bought this mixer about 2 years ago there are a couple of surface scratches but everything works as it did when it was new, no bleeding or crackling from the up-faders or crossfader everything's in perfect working order.

I can deliver in leeds if need be.

I'm sure if you're looking at this ad you know what this mixer is but for those of you who don't here's some spec and blurb I stole from another website:

Auto BPM Counters
Check the tempo at a glance with individual BPM counter displays for channel 1 and 2. You get automatic "beats per Minute" for virtually all types of dance music, from any source…CD, turntable, or DAT.

3 Band EQ for Each Channel
There's individual Low, Mid and High equalization for each channel with an exceptional wide range of adjustment: -26dB- +12dB. With this adjustment range you can use it as a "Kill Switch", widening the scope for creative mixing.

Fader Start Play
Connecting the DJM-300 to the CDJ-500 Series enables you to take advantage of the fader Start Play. Increasing the Fader (or Cross Fading) on the mixer automatically releases the pause control of the player, starting the music immediately.

Split Headphone Monitor
This handy function makes sound-source monitoring more convenient and flexible than ever, by allowing you to switch easily between all-channel stereo, all-channel mixed stereo, and all-channel left/right distributed monitoring. (See Spec)

Phono/Line Input with Gain Knob
With Gain a for each channel, you have input access for either a phono or a CD, DAT, etc.

Trim
There are separate controls or each channel to adjust differences in signal levels. This function is called 'Gain' on mixers of other brands.

Mic
A volume control is provided for the microphone, with a separate EQ for tonal adjustment.

Peak Level Meter
The dual-purpose Peak Level Meter can be switched to monitor the master output level or alternatively the left meter can show the channel 1 signal while right meter shows the channel 2 signal.

PFL Switches
For a very versatile way to pre-listen to the mixer there are 3 buttons on the left of the mixer to select just that sound that YOU really want or need to head. Check the following table to see which buttons should be pressed to get you listening to the things you want.

Frequency Response
20Hz ~ 20kHz
Distortion
0.05 %
Signal to Noise Ratio line
80 dB
Crosstalk
70dB or more (1kHz)
Power Supply
AC 220-240V, 50/60Hz
Power Consumption
17 W
Dimensions
308 x 220 x 107 ( WxDxH )
Net Weight
3.7 kg

Input Specs & Terminals

CD
2 x (RCA)
Phono/Line
2 x (RCA)
Mic
2 x (1x Combi Phone/XLR 1x Jack
Faderstart
2 x (mono mini JACK)

Output Specs & Terminals

Master Out
2 x (RCA) 0 dBV (1V) / 1k
Headphone Monitor Out
1 x (1/4" Phone) 0 dBV(1V)/22

Channel Equalizers


Low Frequency
-20 ~ +12 dB @ 100Hz
Mid frequency
-20 ~ +12 dB @ 1kHz
high Frequency
-20 ~ +12 dB @ 10kHz

Microphone Equalizers
Low Frequency
-12 ~ +6 dB @ 100Hz
high Frequency
-12 ~ +6 dB @ 10kHz

• Report this ad
• Save
• Share by email

Enlarge

Location map: Leeds, Leeds